Please note that this function will not interfere with pre-stored stations on buttons 1-6.
This function automatically seeks and stores up to 8 strong AM or FM stations.
This is especially useful when travelling in areas where radio stations are unfamiliar.
1. Depress and hold the "AUTO" button for at least 1 second. A number of strong stations (max. 8) on the chosen waveband are now automatically stored in the memory.
The lowest frequency station is heard. If
there are no audible stations, "- - - - "
is displayed.
2. Press the "AUTO" button (for less than
1 second) to obtain another
autostored station.
A new station will be selected each time the button is pressed momentarily.
Adjust the bass by sliding the control up or down (up to increase, down to decrease).
A "detent" indicates "equalized" bass.
Adjust the treble by sliding the control up or down (up to increase, down to decrease).
A "detent" indicates "equalized" treble.
Adjust front/rear speaker balance by sliding the control up or down.
(UP to direct more sound to the front speakers, DOWN to direct more sound to the rear speakers).
The "detent" indicates "equalized" front /rear balance position.
Press the "volume" knob to temporarily mute the sound. "PAUSE" is displayed.
Pull out the "volume" knob and adjust the left/right balance by turning the knob counter- clockwise or clockwise.
Press this button to listen to each station for five seconds. Press it again to stop scanning.
The ASC function automatically adjusts the volume level of the audio system according
to driving speed.
To deactivate ASC depress the "CD"
button until "ASC" is no longer displayed.
To activate ASC, depress the "CD" button
until "ASC" is displayed (approx. 2 seconds).
The cassette is inserted with the open side to the right (side 1 or A of the cassette upwards).
When the cassette is inserted, the radio is disengaged and the cassette will start to play automatically. "TAPE " or "TAPE " is displayed to indicate which side of the tape is being played. When one side of the tape has been played the unit will automatically play the other side (auto-reverse). The cassette can be inserted or ejected even when the unit is switched off.
Press the button to play the other side of the tape.
The tape is advanced with " 
" and rewound with " 
". "FF" will be
displayed while advancing the tape. "REW" will
be displayed while rewinding the tape.
Fast winding can be stopped by pressing the tuning button or the TAPE button again.
Press this button when you use tapes recorded with the Dolby B noise reduction system.
The Dolby symbol will be indicated in the display.
Press the " 
" button and the tape
will automatically advance to the next song.
There must be a gap (no audio sound) of approx. 5 seconds between songs for this function to operate.
Press the " 
" button and the tape
will automatically rewind to the previous song.
There must be a gap (no audio sound) of approx. 5 seconds between songs for this function to operate.
If you press the "volume" knob the tape is stopped, the unit is silent and "PAUSE" is displayed. To restart the tape press the knob again.
Press this button to listen to the first five seconds of each song. Press it again to
stop scanning. "SCAN" will be displayed.
There must be a gap (no audio sound) of approx. 5 seconds between songs for this function
to operate.
If the button is pressed the tape will stop and the cassette will be ejected. The radio will be automatically engaged. The radio, CD or CD changer will engage automatically (depending on which mode was activated before the tape was played).
Push one of the waveband selector buttons
When the unit re-enters Radio mode, the cassette will not be ejected.
If the CD changer function has been disconnected, the CD changer mode can be re-entered by pressing the "CHGR" button.
If the CD function has been disconnected and the CD has not been ejected, the CD mode can be re-entered by pressing the "CD" button.
If the Tape function has been disconnected and the cassette has not been ejected, the
Tape mode can be re-entered by pressing the "TAPE" button.
With the audio system on, insert a disc into
the slot with the label side up. When the CD is inserted, the radio is disengaged and the
CD will start to play automatically.
The CD can be inserted or ejected even when the unit is switched off.
When the CD has been inserted into the player, the "DISC IN" light will always be ON even if
the radio, tape deck or CD changer are in use.
Press "CD" to actuate the CD mode. The
track last listened to will continue to play. If the
CD-player is empty, "NO CD" will be displayed.
If the button is pressed the CD will stop and the disc will be ejected. The radio will
be automatically engaged. The radio, tape or CD changer will engage automatically
(depending on which mode was activated before the
CD was played).
NOTE: If the CD eject button is pressed and the disc is not removed within 12 seconds,
the disc will be drawn into the CD player again.
Press the " " or " " button to search within a track. While the button is
depressed the playing time for this track will be
displayed.
Press " " for forward selection or " " for backward selection. The disc number
and the chosen track number will be displayed.
When the "CD" button is pressed the playing time for the current track is displayed for 5 seconds.
Press this button to listen to the first ten seconds of each track. Press it again to
stop scanning.
Press "RND" to actuate the random
mode. From a disc, tracks will be played at random*.
"RND" will be displayed when this function
is engaged.
* The random function may cause a disc to be played more than once before playing through all discs.
If you press the "volume" knob the disc is stopped, the unit is silent and "PAUSE" is displayed. To restart the disc press the knob again.
Push one of the waveband selector buttons
If a cassette is already inserted, the tape deck will reengage if the "TAPE" button is pressed.
If the CD function has been disconnected and the CD has not been ejected, the CD mode can be re-entered by pressing the "CD" button.
If the CD changer function has been disconnected, the CD changer mode can be
re-entered by pressing the "CHGR" button.
Press "CHGR" to actuate the CD changer mode. The disc/track last listened to will continue to play. If the CD-changer cartridge* is empty, "0-00" will be displayed. If there is no cartridge in the changer "- - - -" will be displayed. If a selected disc does not exist, the disc number and "-00" will be displayed and the next disc will be automatically selected.
Depress one of the preset buttons (1-6) to select the disc number desired. The selected disc number and track number will be displayed.
Press the " " or " " button to search within a track. While the button is
depressed the playing time for this track will be
displayed.
*The functions pertaining to the CD-changer are only applicable if
the unit has been connected to the Volvo CD-changer, which is
sold separately as an accessory.
If no CD-changer is connected to the unit "EEEE" will be displayed
if you happen to choose CHGR mode.
Press " " for forward selection or " " for backward selection. The chosen
disc number and track number will be displayed.
When the "CHGR" button is pressed the playing time for the current track is displayed for 5 seconds.
Press this button to listen to the first ten seconds of each track. Press it again to stop scanning.
