If the button is pressed the tape will stop and the cassette will be ejected. The radio will be automatically engaged. The radio or CD changer will engage automatically (depending on which mode was activated before the tape was played).
Push one of the waveband selector buttons
When the unit re-enters Radio mode, the cassette will not be ejected.
If the Tape function has been disconnected and the cassette has not been ejected, the Tape mode can be re-entered by pressing the "TAPE" button.
If the CD changer function has been disconnected, the CD changer mode can be
re-entered by pressing the "CHGR" button.
Press "CHGR" to actuate the CD changer mode. The disc/track last listened to will continue to play. If the CD-changer cartridge* is empty, "---" will be displayed.
If a selected disc does not exist, the disc number and "5--" will be displayed and the next disc will be automatically selected.
Depress one of the preset buttons (1-6) to select the disc number desired. The selected disc number and track number will be displayed.
Press the " 
" or " 
" button to search within a track. While the button is
depressed the playing time for this track will be
displayed.
*The functions pertaining to the CD-changer are only applicable if
the unit has been connected to the Volvo CD-changer, which is
sold separately as an accessory.
If no CD-changer is connected to the unit "EEEE" will be displayed
if you happen to choose CHGR mode.
Press " " for forward selection or " " for backward selection. The chosen
disc number and track number will be displayed.
When the "CHGR" button is pressed the playing time for the current track is displayed for 5 seconds.
Press this button to listen to the first ten seconds of each track. Press it again to
stop scanning. During scanning "SCAN" will
be displayed.
Press "RND" to actuate the random mode. From a disc chosen at random, 4 tracks will be played (also chosen at random)*. A new disc will then be played in the same way. "RND" will be displayed when this function is engaged.
* The random function may cause a disc to be played more than once before playing through all discs.
If you press the "volume" knob the disc is stopped, the unit is silent and "PAUSE" is displayed. To restart the disc press the knob again.
Push one of the waveband selector buttons.
If a cassette is already inserted, the tape deck will reengage if the "TAPE" button is pressed.
If the CD changer function has been disconnected, the CD changer mode can be
re-entered by pressing the "CHGR" button.
Power output: 4 x 25 W (10% dist.)
Output impedance: 4 Ohms
System voltage: 12 Volts, negative ground
System: PLL (Phase Lock Loop) system with tuned RF (Radio
Frequency) front and end automatic wide band gain control.
Electronic suppression circuitry (noise killer).
This Radio is equipped with FM-Diversity.
Frequency range:
AM 530 1710 kHz
FM 87.9 107.9 MHz
Sensitivity:
AM 20µV
FM 1.1µV
Stereo separation: 35 dB
4track, 2 channel stereo
Full logic electronic tape transport
Tape speed: 4.76 cm/sec.
Channel separation 53 dB
Frequency range 3015000 hz
S/N (120 µV) 56 dB without Dolby B NR
S/N (120 µV) 66 dB with Dolby B NR
Wow and Flutter < 0.06%
Pinch off
"Dolby" and the double D symbol 
are the trademarks of
Dolby Laboratories Licensing Corporation. Dolby noise reduction
manufactured under license from Dolby Laboratories Licensing Corporation.
2. · Volume (turn)
· Pause/Mute (push)
· Balance (pull)
3. Single CD mode selector - Active Sound Control
4. CD changer selector
5. · Tape mode selector
· Tape direction selector PROG
6. Bass control
7. Treble control
8. Fader control
9. · Preset buttons
· CD-Disc No. selector
10. Dolby B NR button
11. CD-random play
12. Cassette eject
13. Remote control window
14. Auto seek memory
15. Scan
16. · Seek tuning up/down
· TP-Next/Previous song
· CD-Next UP/Previous DOWN track
17. · Manual tuning
· TP-fast forward/Rewind
· CD-Music search UP/DOWN
18. CD eject (single)
19. CD slot
20. Cassette slot
21. Display
22. Waveband selector (AM)
23. Waveband selectors (FM)
24. · Anti-theft LED
· Disc in LED (single)
TP = Applicable only in Tape Mode
The radio features anti-theft circuitry. If the set is removed from the vehicle or if the battery power is disconnected, a special code must be entered to enable operation of the set.
Refer to the radio code card supplied
with your vehicle or ask your retailer for
the correct code.
When the car is parked with ignition key removed the anti-theft LED will flash.
After installation or when the set has been disconnected from power, the set displays "CODE" when it is switched on.
Enter the 4-digit code using the preset buttons.
If the correct code is entered the set is ready to use.
If you enter an incorrect code you must enter the correct code again from the beginning.
If an incorrect code has been entered "EEEE" is displayed. Enter the correct code. After three unsuccessful coding attempts the set will lock and remain locked for two hours.
"OFF" is displayed.
During this waiting period:
· the battery must be connected
· the ignition key must be turned to position I
· the unit must be turned on
Make sure the headlights are turned off to help prevent battery drain (please refer to page 24 for information on turning the headlights off).
Enter the code again once this time has elapsed.
Push the button to switch on the radio. Press the button to turn the radio off.
Turn the button clockwise to increase the volume. The volume control is electronic and has no end stop.
The desired waveband is set by pressing one of the waveband selector buttons. The frequency and waveband is shown on the display.
NOTE: There are two FM wavebands and one
AM waveband. This makes it possible to store 2 x 6 FM stations and 6 AM stations in
the memory.
The radio can be used in most parts of the world by changing the frequency selection intervals as follows:
Depress and hold preset button 5 and turn the radio ON. "USA" will flash on the display.
Each time button 5 is pressed, the frequency selection will change from "USA" to "AUS", etc. When the correct country name is displayed, wait 5 seconds and the radio will be ready for use.
Press the left side tune button to tune to
lower frequencies and the right side to tune to
higher frequencies. The tuned frequency is displayed.
ST will be displayed to indicate stereo FM reception.
Press the left side tune button to tune to lower frequencies and the right side to tune to higher frequencies. The radio seeks the next audible station and stops there. If you wish to continue the seek tuning, press the tune button again.
1. Tune to the desired frequency.
2. Depress and hold a preset button. The audio will cut out. Keep the button depressed until the audio comes on again (approx. 2 seconds).
3. The frequency is now stored on this preset button.
To select a pre-programed radio frequency, depress the preset button. The set frequency will be displayed.
