pg. 161 Cassette deck


A - Cassette slot


The cassette is inserted with the open side to the right (side 1 or A of the cassette upwards). When the cassette is inserted, the radio is disengaged and the cassette will start to play automatically. "TAPE " or "TAPE " is displayed to indicate which side of the tape is being played. When one side of the tape has been played the unit will automatically play the other side (auto-reverse). The cassette can be inserted or ejected even when the unit switched off.


B - Reversing the tape (PROG)


Press the button to play the other side of the tape.


C - Fast winding


The tape is advanced with " " and rewound with " ". "FF" will be displayed while advancing the tape. "REW" will be displayed while rewinding the tape.
Fast winding can be stopped by pressing the tuning button or the TAPE button again.


D - Dolby B NR button


Press this button when you use tapes recorded with the Dolby B noise reduction system. The Dolby symbol will be indicated in the display.

pg. 162 Cassette deck (cont.)


A - Next selector


Press the " " button and the tape will automatically advance to next song. There must be a pause of approx. 5 seconds between songs for this function to operate.


B - Previous selector


Press the " " button and the tape will automatically rewind to the previous song. There must be a pause of approx. 5 seconds between songs for this function to operate.


C - Pause


If you press the "volume" knob the tape is stopped, the unit is silent and "PAUSE" is displayed. To restart the tape press the knob again.


D - Scan


Press this button to listen to the first five seconds of each song. Press it again to stop scanning. "SCAN" will be displayed.

pg. 163 Cassette deck (cont.)


A - Cassette eject


If the button is pressed the tape will stop and the cassette will be ejected. The radio will be automatically engaged. The radio, CD or CD changer will engage automatically (depending on which mode was activated before the tape was played).


B - To re-enter Radio mode


Push one of the waveband selector buttons
When the unit re-enters Radio mode, the cassette will not be ejected.


C - To re-enter Tape mode


If the Tape function has been disconnected and the cassette has not been ejected, the Tape mode can be re-entered by pressing the "TAPE" button.


D - To re-enter CD mode


If the CD function has been disconnected and the CD has not been ejected, the CD mode can be re-entered by pressing the "CD" button.


E - To re-enter CD changer mode


If the CD changer function has been disconnected, the CD changer mode can be re-entered by pressing the "CHGR" button.

pg. 164 CD - Single


A - CD slot


With the audio system on, insert a disc into the slot with the label side up. When the CD is inserted, the radio is disengaged and the CD will start to play automatically.
The CD can be inserted or ejected even when the unit is switched off.


When the CD has been inserted into the player, the "DISC IN" light will always be ON even if the radio, tape deck or CD changer are in use.


B - CD mode selector


Press "CD" to actuate the CD mode. The track last listened to will continue to play. If the CD-player is empty, "NO CD" will be displayed.


C - CD eject


If the button is pressed the CD will stop and the disc will be ejected. The radio will be automatically engaged. The radio, tape or CD changer will engage automatically (depending on which mode was activated before the CD was played).


NOTE: If the CD eject button is pressed and the disc is not removed within 12 seconds, the disc will be drawn into the CD player again.

pg. 165 CD - Single (cont.)


A - Music search


Press the " " or " " button to search within a track. While the button is depressed the playing time for this track will be displayed.


B - Changing the selected track number


Press " " for forward selection or " " for backward selection. The chosen track number will be displayed.


C - Playing-time display


When the "CD" button is pressed the playing time for the current track is displayed for 5 seconds.


D - Scan


Press this button to listen to the first ten seconds of each track. Press it again to stop scanning.

pg. 166 CD - Single (cont.)


A - Random choice


Press "RND" to actuate the random mode. From a disc, tracks will be played at random. "RND" will be displayed when this function is engaged.


B - Pause


If you press the "volume" knob the disc is stopped, the unit is silent and "PAUSE" is displayed. To restart the disc press the knob again.


C - To re-enter Radio mode


Push one of the waveband selector buttons


D - To re-enter Tape mode


If a cassette is already inserted, the tape deck will re-engage if the "TAPE" button is pressed.


E - To re-enter CD mode


If the CD function has been disconnected and the CD has not been ejected, the CD mode can be re-entered by pressing the "CD" button.


F - To re-enter CD changer mode


If the CD changer function has been disconnected, the CD changer mode can be re-entered by pressing the "CHGR" button.




Previous Page  Next Page

Contents | Top of Page