pg. 148 Cassette deck


A - Cassette slot


The cassette is inserted with the open side to the right (side 1 or A of the cassette upwards). When the cassette is inserted, the radio is disengaged and the cassette will start to play automatically. "TAPE " or "TAPE " is displayed to indicate which side of the tape is being played. When one side of the tape has been played the unit will automatically play the other side (auto-reverse). The cassette can be inserted or ejected even when the unit is switched off.


B - Reversing the tape (PROG)


Press the button to play the other side of the tape.
The side of the tape being played will be displayed.


C - Fast winding


The tape is advanced with " " and rewound with " ".
Fast winding can be stopped by pressing either the button again or the "TAPE" button.


D - Dolby B NR button


Press this button when you use tapes recorded with the Dolby B noise reduction system. The Dolby Symbol will be indicated in the display.

pg. 149 Cassette deck (cont.)


A - Next selector


Press the " " button and the tape will automatically advance to the next song. There must be a pause of approx. 5 seconds between songs for this function to operate.


B - Previous selector


Press the " " button and the tape will automatically rewind to the previous song. There must be a pause of approx. 5 seconds between the songs for this function to operate.


C - Pause


If you press the "volume" knob the tape is stopped, the unit is silent and "PAUSE" is displayed. To restart the tape press the knob again.


D - Scan


Press this button to listen to the first five seconds of each song. Press this button or the "TAPE" button to stop scanning. During scanning "SCAN" will be displayed.

pg. 150 Cassette deck (cont.)


A - Cassette eject


If the button is pressed the tape will stop and the cassette will be ejected. The radio will be automatically engaged. The radio or CD will engage automatically (depending on which mode was activated before the tape was played).


B - To re-enter Radio mode


Push one of the waveband selector buttons
When the unit re-enters Radio mode, the cassette will not be ejected.


C - To re-enter Tape mode


If the Tape function has been disconnected and the cassette has not been ejected, the Tape mode can re-entered by pressing the "TAPE" button.


C - To re-enter CD changer mode


If the CD changer function has been disconnected, the CD changer mode can re-entered by pressing the "CHGR" button.

pg. 151 CD - Changer (certain models)


A - CD changer mode selector


Press "CHGR" to actuate the CD changer mode. The disc/track last listened to will continue to play. If the CD-changer cartridge* is empty, "---" will be displayed.
If a selected disc does not exist, the disc number and "5--" will be displayed and the next disc will be automatically selected.


* The functions pertaining to the CD-changer are only applicable if the unit has been connected to the Volvo CD-changer which is sold separately as an accessory, or on certain models, standard on the car.
If no CD-changer is connected to the unit "EEEE" will be displayed if you happen to choose CHGR mode.


B - Disc number selector


Depress one of the preset buttons (1-6) to select the disc number desired. The selected disc number and track number will be displayed.


C - Music search


Press the " " or " " button to search within a track. While the button is depressed the playing time for this track will be displayed.

pg. 152 CD - Changer (certain models) (cont.)


A - Changing the selected track number


Press " " for forward selection or " " for backward selection. The chosen disc number and track number will be displayed.


B - Playing-time display


When the "CHGR" button is pressed the playing time for the current track is displayed for 5 seconds.


C - Scan


Press this button to listen to the first ten seconds of each track. Press it again to stop scanning. During scanning "SCAN" will be displayed.

pg. 153 CD - Changer (certain models) (cont.)


A - Random choice


Press "RND" to actuate the random mode. From a disc chosen at random, 4 tracks will be played (also chosen at random). A new disc will then be played in the same way. "RND" will be displayed when this function is engaged.


B - Pause


If you press the "volume" knob the disc is stopped, the unit is silent and "PAUSE" is displayed. To restart the disc press the knob again.


C - To re-enter Radio mode


Push one of the waveband selector buttons.


D - To re-enter Tape mode


If a cassette is already inserted, the tape deck will re-engage if the "TAPE" button is pressed.


E - To re-enter CD changer mode


If the CD changer function has been disconnected, the CD changer mode can re-entered by pressing the "CHGR" button.

pg. 154 Technical specifications

SC-813


Output: 4 x 25 W (10% dist.)
Output impedance: 4 Ohms
System voltage: 12 Volts, negative ground


Radio


System: PLL (Phase Lock Loop) system with tuned RF (Radio Frequency) front and end automatic wide band gain control.
Electronic suppression circuitry (noise killer).
This radio is equipped with FM-Diversity.


Frequency range:
FM 87.9 - 107.9 MHz
AM 530 - 1710 kHz
Sensitivity
FM 1.1ÁV
AM 20ÁV
Stereo separation: 35dB


Cassette deck


4-track, 2 channel stereo
Full logic electronic tape transport


Tape speed: 4.76 cm/sec.
Channel separation 53dB
Frequency range 30-15000hz
S/N (120 ÁV) 56 dB without Dolby B NR
S/N (120 ÁV) 66 dB with Dolby B NR
Wow and Flutter less than 0.06 %
Pinch off


"Dolby" and the double D symbol are the trademarks of Dolby Laboratories Licensing Corporation. Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation.




Previous Page  Next Page

Contents | Top of Page